SimpleMachinesForum     March 22, 2019, 13:55:53 PM
Welcome, Guest. Please login or register today with Malta Shooting Sports Forum!
« ForumGeneral Interest ForumsArticles and InfoSABRE DEFENCE - How it makes its 50Cal Barrels »


Random Pics

 (Read 2249 times) [1]

  SABRE DEFENCE - How it makes its 50Cal Barrels
« on: January 09, 2010, 16:18:46 PM » by Quantumshot
Sorting through some engineering literature files this morning I came across the brochure of a precision grinding and boring machine manufacturer called Sunnen. My primary area of profession is precision engineering were I happened to deal with this manufacturer some years ago.  So curiousity led me to access their website for an updated look and I came across a very interesting article regarding the specialized machine they had specifically built for Sabre Defence in order for them to produce their famous and high quality 50BMG barrels.  Makes interesting reading :

Sabre Defence scores hit with honed fifty-caliber machine gun barrels

Nashville, TN - "Ask the man who owns one" is a 1950's advertising slogan that still rings true, and if America's war fighters are to be believed, the fifty caliber machine gun barrels made by U.K.-based Sabre Defence Industries are the best in the business. Part of the reason for that preference, officials at the Nashville plant believe, is the superior accuracy and easy cleaning that result from the excellent bore geometry and surface finish imparted by a Sunnen HTB tube hone. Since installing the hone, test groups from sample barrels have tightened up nearly 100% over the Army's requirement.

U.K-based Sabre acquired the Nashville facility in late 2002. "We have been making military fifty-caliber barrels and guns since 1979, as well as commercial rifle barrels for various companies over the years, and the new owner, Guy Savage, planned to reposition our operation to be about 50/50, military and commercial," said Charles Shearon, general manager of the Nashville plant. "Our operation was to be a launch pad for U.S. production of Guy's XR15/16 rifles - a premium variant of the AR15/M16 - for the civilian and police markets. The start of the Iraq war in early 2003 changed that. We received strong military orders for our fifty caliber machine-gun barrels, 7.62mm M60 machine gun barrels, M134 minigun barrels, M6 weapons mount and various components." The demand for fifty caliber barrels grew in the next few years from about 100 per month to 1200 per month, and employment at the plant ramped up from 15 to 85.

Sabre makes two variations of the fifty-caliber barrel: the heavy barrel for the M2 Browning gun, and a lighter, shorter version for the M3 aircraft machine gun. Both have a Stellite liner for the chamber throat and first few inches of rifling. The liner and a retainer for attaching the barrel to the receiver are both shrink fitted. The Stellite liner (75% cobalt and 25% chrome) withstands the intense heat and gas erosion of the initial discharge better than any ordnance steel.

The heavy barrel starts as a 45-inch piece of bar stock, 2.625" in diameter, weighing about 73 pounds. "For the heavy barrel we use MIL-S-46047, a special alloy with extra vanadium to increase life," Shearon explained. "The aircraft barrel is MIL-S-11595, which we also use in our commercial guns and pass the quality advantage on to our customers. We have to buy these steels by mill run. The heavy-barrel material is cut by the mill and heat treated when we receive it. We do some preliminary operations to prep it, then gun-drill the chamber end with a 0.75" hole about 11" deep. A temporary liner is then installed and the rest of the barrel is gun-drilled with a 0.490" hole. We ream after drilling, and have a hole-size tolerance of ▒0.001" at that point, but the next step is to stress relieve, and that often changes the bore. Honing allows us to control the bore's final geometry and hole size to a fraction of the allowable MIL-Spec, which is helpful because of the small variations introduced later with button rifling and chrome plating."

Sabre had been using a manual lapping machine to finish bores, but the increase in military orders resulted in a bottleneck of work at that operation. "Sunnen's senior field engineer in our area, Ron Williams, has always been helpful to us, so we consulted him on how current technology could improve our processes and output," said Shearon.

The result was installation of a Sunnen HTB-2000 tube hone system in early 2006. Equipped with Borazon« CBN stones, a traveling steady rest and whip-guide bushings, the PLC-controlled machine has an output of 10-12 barrels an hour, compared to about one an hour with the old process. "The load sensing system on the machine automatically adjusts the stone feed for optimum stock removal without tool crashes, which reduced our labor and helped improve output," explains Garry Hogan, Sabre's plant manager. "More important to us is the automatic gaging system. The machine gages the bore after every stroke, allowing us to control hole size, roundness and straightness to 0.0005" without operator intervention. Even after button rifling and plating, we are able to stay well below the MIL-Spec of ▒0.004" on bore dimensions, which is quite a feat on a bore length of 33"." Tool life for the process varies with the amount of stock removal, which typically runs 0.002-0.004".

Hogan says the crosshatch pattern that honing leaves on the bore surface aids in rifling the barrel by maintaining a consistent lubricant film. To create the rifling, a 0.517" carbide button is pushed through the bore, which is 0.503" at this stage. The button has the rifling form in high relief on it, and is rotated at the correct twist rate. The lands on the button engrave the grooves in the bore. "The very round hole we get with the hone helps prevent high and low spots in the rifling, and keeps the grooves concentric with the bore, all of which aid accuracy," Hogan adds. "We're unique in the business in that we make our own buttons, too, which gives better control of our quality."

Surface finish of the bore coming off the hone is approximately 20 Áin Ra and drops into the low teens after button rifling, significantly exceeding the MIL-SPEC of 63 Áin. This helps to maximize muzzle velocity and makes it harder for metal and powder fouling to get a toehold, so cleaning is easier. "In the precision rifle shooting community, the sweet spot for surface finish is considered 10-20 Áin," explains Hogan. "Though it seems contradictory, a smoother surface actually increases surface contact and friction with the bullet jacket, causing increased copper fouling."

After contouring the exterior of the barrel, the bore is chrome plated to a thickness of 0.0013-0.0020". "One of the reasons we run such tight tolerances off the hone is because we lose some tolerance in the plating process," Hogan explains. "The platers are excellent and seldom vary more than 0.0005", but if they do, we already have some margin for error to work with."

The Stellite liner starts as a casting, which Sabre gun drills and reams, then sends to a third party for honing. "This supplier has never scrapped a part, so it's a good system that we're not going to 'fix,'" Hogan adds. With the barrel induction heated and an alignment gage in place, the Stellite liner is pressed into the barrel's chamber so that its lands and grooves line up perfectly with those of the barrel.

Every barrel is then fired with a high-pressure test round and examined with a Sunnen magnetic particle inspection system. "We're required to test fire a certain number of barrels from each lot for accuracy," Shearon says. "The Army's spec calls for a 10-round burst to hit within an 8" circle at 100'. We've always been able to hit 7", but since we started honing we're hitting 4"."

According to Sunnen's Ron Williams, Sabre's experience is not unusual. "Honing is earning new respect from barrel makers, whether it's pistol, rifle, shotgun or even paintball," he says. "One leading maker of special-purpose rifle barrels both rough hones and finish hones. They are perfectionists who hold ▒0.000050" roundness and a tenth or better size the entire length of the barrel."

"We're lucky to be able to interact with users of our products," Shearon says. "At a recent armor war fighting symposium at Ft. Knox earlier this year, we had several tank gunners tell us they knew as soon as they shot a fifty if it was a Sabre barrel or not. If it wasn't, they found one of ours and installed it. We're sure our commercial rifles will earn the same loyalty, too, as we ramp up production and get the word out."


Better to be judged by 12 than carried by 6

  Re: SABRE DEFENCE - How it makes its 50Cal Barrels
« Reply #1 on: January 14, 2010, 13:58:41 PM » by centerfire
Interesting article Eric!



  Re: SABRE DEFENCE - How it makes its 50Cal Barrels
« Reply #2 on: January 14, 2010, 16:01:06 PM » by Vincent
Button rifling actually work hardens the bearing surface; Barrels thus rifled last longer. Adds a bit of stress but thats easily relieved.

 (Read 2249 times) [1]
Jump to:  

Members List

(Choose color)


Welcome to Malta Shooting!

Register today with Malta Shooting and join in the active discussions about your favourite sport and hobby!




29985 Posts
4700 Topics
630 Members
Latest Member: Cicco

Powered by PHP
Powered by MySQL
Valid XHTML 1.0!
Valid CSS!

Powered by SMF 1.1.18 | SMF © 2005, Simple Machines
Simplicity design by Bloc